AMD Ryzen 7 1800X CPU Review (2024)

Page 4 of 12:

Overclocking & Test Setup

AMD Ryzen Master

AMD's Ryzen Master software allows you to tune a number of variables, such as the CPU's ratio multiplier, voltage, and memory speeds, from inside the operating system. When you open the utility, it warns you of the perils associated with overclocking and disavows AMD of responsibility should you inadvertently nuke your processor. When you adjust parameters, the CPU automatically switches into OC mode and disables all of the normal thermal and voltage restrictions.

You're able to disable cores in groups of two, which could help you hit more aggressive frequencies. Individual cores cannot be sped up or slowed down. Rather, adjustments apply to all cores.

It's worth noting that the older AMD Overdrive tool is not compatible with Ryzen CPUs.

We prefer overclocking from the motherboard firmware, though. Using simple multiplier and voltage adjustments, we achieved a Prime95-stable 4 GHz clock rate at 1.425V using Asus' Crosshair V Hero (that was with load-line calibration set to Auto). The highest temperature we saw was 82°C during our stress test.

Of course, if you're using a cooling solution less capable than our Corsair H100i v2 at its maximum fan/pump settings, overheating could become a problem. AMD predicts that most customers should see somewhere between 3.9 and 4.1 GHz across all cores, and suggests you stick with a 1.35V ceiling if you want your chip to last. Although core voltages in excess of 1.45V are considered sustainable, they'll have a more pronounced effect on longevity.

Asus notes that pushing memory transfer rates in excess of 2933 MT/s on its Crosshair VI Hero requires memory binned at 3200 MT/s or higher with Samsung A-die ICs. AMD hasn't opened up all of Ryzen's memory sub-timings yet, but we expect the company to open this up soon. Currently, Asus' testing with Hynix A-die ICs tops out at 3000 MT/s, but that may improve with microcode updates.

Measurement System and Methodologies

Splitting our tests between two locations proved difficult this time around, since AMD sent our German lab samples two days before the launch. We wanted to benchmark with retail hardware though, not downclocked engineering samples, so we raced the clock to crank out results.

Our challenge was complicated by AMD's decision to send our labs two different motherboards. Germany received MSI's X370 XPower Gaming Titanium, so all of our workstation, HPC, and power consumption tests were run on that platform. Meanwhile, the U.S. team used Asus' Crosshair VI Hero and the EVGA GeForce GTX 1080 FE for graphics testing.

MSI’s X370 XPower Gaming Titanium, just like Asus’ model, is a flagship motherboard based on AMD's X370 chipset. We stuck with AMD’s recommended presets on both machines, minimizing issues attributable to our dissimilar boards. Our German office used two 8GB Corsair Vengeance LPX DDR4-2666 memory sticks and a custom water-cooling loop.

Image

1

of

2

If you want to know more about how the Tom's Hardware DE system looks and is controlled, check out How We Test Graphics Cards.

To keep things simple, we present the highlights in the following table. The Intel systems are identical to those for the gaming tests.

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12

Current page:Overclocking & Test Setup

Prev Page The AM4 PlatformNext Page Cache Testing